HEAVY-DUTY DC
CIRCUIT COMPONENTS

Blue Sea

Mega Fuse / Block - The industry’s most popular fusing for protecting 1000-2000 watt inverter installations and high output alternators. Fuses are available from 100 - 300 amps DC!
Class T, 400 Amp Fuse / Block - Built for heavy duty fusing in the 300 - 400 amp range. The terminal studs allow for plenty of clearance for the ring terminals on cables used in this amperage range.
MaxiFuse / Block - These low cost fuse systems are perfect for protecting circuits in the 30-80 amp range.
6 Gang Fuse Block - This fuse block contains a tin plated positive and negative bus bar for ease of wiring in complete circuits. A small lever on each circuit is used to eject a blown fuse, while the cover retains 6 spares!
High Amperage Breakers - These breakers are surface mounted, ignition protected, waterproof and rated from 50 - 150 amps. The reset handle tells if a circuit fault has occurred and the trip button can be manually tripped to function as a switch.

model/description dimensions ship wt   cost Mega Fuse Block 4.5" x 1.25” 3 lbs. $30 Mega Fuse 100 A, 150A, 200A, 250A, 300A 1 lbs.   $10 Class T Fuse Block 7" x 2" 6 lbs.   $76 Class T Fuse 300A,400A 2 lbs.   $40 BS-5006, Maxi Fuse Block 2” x 3” 2 lbs.   $26 Maxi Fuse 30-80 Amps 1 lbs.   $4 BS-5015, 6 Gang Fuse Block 3 1/4” x 5” 4 lbs.   $39 Heavy Duty Circuit Breakers 50A,75A,100A,125A ,150A 3 lbs. $45

BLUE SEA

Battery Selector Switches - The 2 Bank Selector Switch is smaller than a standard switch yet handles more current. Features Battery 1, 2, both & off positions with full 360°; switch rotation. The On/Off Master Switch is used for controlling a single battery bank. A New Heavy Duty Master On/Off switch capable of 550 Amps is a perfect battery disconnect for large inverters, or large diesel engines.
Heavy-Duty Busbars Use these heavy duty TIN PLATED BRASS BUSBARS to consolidate multiple negative wires, to create a positive busbar or for feeding multiple circuits. Screw type, stud type and Dual Bus Bars are described below.
PowerPost Plus - Allows a number of cables to branch out from a central positive connection, or a number of negative return cables to be consolidated into a single point. Join 2 cable runs or tap into existing runs to create a new branch.
600A Power Bar - Use this multiple post, 600 amp bus bar when a single post just isn’t enough. PowerBars are fabricated from a solid block of tinned copper with four 3/8” studs. Accommodates even the large ring terminals used on 4/0 cable.
Power Distribution & Splicer Blocks - Distribution Blocks split primary power into secondary circuits, or join cables from a solar array to a power lead-in cable. Splicer Blocks connect two wires of the same or different sizes.

Back to top

Paneltronics
Choose from the most comprehensive line of breaker panels in the industry. Over 150 modular panels customized to your specs. Back-lighting and LED indicators are standard. All breaker panels are completely pre-wired, reducing your installation time and cost.

Model 3204

2200/2300 Series - The perfect choice for system upgrades or for new installations where only a limited number of breakers are required.

3200 Series - Fully metered DC Breaker Panels ranging from 12 to 24 Breakers.

3300 Series - 120V AC fully metered system panels. Model # 3305 has 7 AC Breakers.

3400 Series - Combination AC & DC Breaker Panels fully metered for both AC & DC. The
DC side ranges from 12 to 18 breakers.

Call for additional information and a FREE Design Guide!

Back to top