Windpower 200 Pole Mount Wind Generator

WIND-POWERED GENERATORS
WIND 10-15 KNOTS
BATTERIES FULL

FERRIS WINDPOWER 200
The rugged Ferris WindPower 200 has a host of advantages over other wind generator models on the market. All WP-200 Wind Systems deliver high charging power in relatively low winds starting in a 5-knot breeze, as well as QUIET operation even in high winds. Unattended, fully automatic operation is achieved with our Overspeed Governor and Multi-Source Voltage Regulator.

All models can easily convert to a Water Powered Generator for long ocean passages. The WP-200 can be used on its own or in combination with other charging sources such as a High Output Alternator, a Solar Charging System or even with a Gen-Set.

	Produces over 200 Amp-hours per day!
	Wind/Water Generator Monitor Provided with all of our WP-200 Systems

WP-200 Wind Generator Systems

WP-200 Rigging Suspended

WP-200 Pole-Mount
This wind generator unit has slip rings for full wind-seeking ability and is commonly mounted on a pole on the aft deck of a boat or near a house. Pole Mount Installation kit not included.

WP-200 Rigging-Suspended
This model raises like a jib in the fore-triangle or on a backstay of a boat. It is perfect for combination wind/water systems, as it is easy to convert and allows for clear decks on an ocean passage.

WP-200 Pole Mount Install Kit
This professional pole mount kit simplifies installation and provides a SUPER STRONG mount for Ferris WP-200 and Air Marine wind generators. The kit includes an anodized aluminum pole and pivoting deck plate, stainless steel struts and all necessary hardware. The pole is available in a 9 ft. length or two 5 ft. lengths with a Pole Mount connector.

WATERPOWER 200 Conversion
Easily converts your WP-200 Wind Generator into a high-output Water Generator. Use as a wind generator for extended stays in port and as a water generator while under way. Includes a gimbal mount, spinner assembly, torque line and hub.

Multi Source Voltage Regulator

Wind Power 200

FERRIS 30-Amp Multi-Source Voltage Regulator
The MSR 30-Amp Regulator protects your gel, AGM or wet batteries from Overcharging! It works well with renewable sources of power, including WIND, WATER & SOLAR chargers. The MSR features a fully adjustable voltage set point and easy to read LED status lights. Simple Installation.

WP-200 Overspeed Governor
This stainless steel governor automatically prevents blade overspeeding and ensures safe operation of your WP-200 wind generator in winds up to 50 knots. Installs easily on the hub of all Ferris Wind Generator Blades.

WP-200 Brush & Bearing Spares Kit
For extended cruising & routine maintenance. The brushes and bearings are normally the wearing parts of a wind generator. This kit includes parts and instructions for easy replacement - no special tools required.

Pole Mount Installation Kit
This professional pole mount kit simplifies your installation and provides a SUPER STRONG mount for the Ferris WP-200 and Air Marine wind generators.

FERRIS WINDPOWER
Packaged Systems

WINDPOWER 200 Wind Generator Packages
HARNESS THE POWER OF THE WIND
These wind-powered generator packages take the guesswork out of system design and installation. They include a reliable WP-200 20 Amp generator, Multi-Source Voltage Regulator, Wind/Water Generator Monitor displaying output current & full Overspeed Protection, for a professional installation.

	Windpower 200 Pole Mount Wind Generator

AIR BREEZE MARINE
The NEW Air Breeze is the latest design in the popular Air series. The Air Breeze is compact and lightweight and uses a 45” diameter, 3 blade propellor. It has slip rings, providing full wind seeking ability and is typically pole mounted on the aft deck of a boat or on a pole near a home.

The new model boasts high output at lower speeds with quieter operation.

• Highest power-to-weight ratio available!
• Lowest cost-per-watt on the market!
• Includes Internal Adjustable Voltage Regulator!
• 12/24 & 48 Volt models available (please specify)!

WHISPER Wind Generators
The Whisper line of Wind Generators is designed for off the grid or remote locations where a dependable source of DC power is needed. Power produced by the Whisper is stored in batteries and used as DC power directly or changed into AC power with an inverter. All models feature a brushless alternator for reliable, long-life operation.

Whisper 500

Whisper 200

Whisper 100

Whisper 500 (H-175) features:

• 3000 Watt output
• Startup windspeed 7 mph
• 15’ Blade diameter
• 5” Schedule 40 Mount
• Available in 24 or 48 Volt DC

Whisper 200 (H-80) features:

• 1000 Watt output
• Startup windspeed 7 mph
• 10’ Blade diameter
• 2.5” Schedule 40 mount
• Field selectable for 12, 24 or 48 V DC
• Perfect for low wind, high output performance

Whisper 100 (H-40) features:

• 1500 Watt output
• Startup windspeed 7.5 mph
• 7’ Blade diameter
• 2.5” Schedule 40 Mount
• Field selectable for 12, 24 or 48 V DC
• Perfect for sustained moderate to high winds.

These units also feature an angle governor which is a “turn the blades out of the wind” approach to high wind overspeed protection. Also included is the EZ wire center for simple hookup. It contains a regulator to prevent battery overcharge.

back to top